Applications
FEP ETFEP-120
Description
FEP ETFEP-120 is a melt processable perfluoro co-polymer of tetrafluoroethylene (TFE) and hexafluoropropylene (HFP). It is intended for use as high temperature wire and cable insulations and jackets.
It exhibits good extrusion processing characteristics, mainly used for wire and cable insulation layer, tubes, film and so on.
| Item | Unit | ETFEP-120 | |
| A | B | ||
| Appearance | / | Translucent particle with impurities such as metal debris andsand, containing visible black particles, percentage point less than 6%. | |
| Melting Index | g/10min | 5.1-8.0 | 8.1-12.0 |
| Tensile Strength | Mpa | ≥21.0 | |
| Elongation at break | % | ≥300 | |
| Relative Gravity | / | 2.12-2.17 | |
| Melting Point | ℃ | 265±10 | |
| Dielectric Constant(106HZ) | / | ≤2.15 | |
| Dissipation Factor(106HZ) | / | ≤7.0x10-4 | |
| Heat Stress Cracking Resistance | / | —— | |
Above characteristics can be changed to meet the specific requirements of customers.
Attention: The processing temperature should not exceed 420°C, to prevent toxic gas from releasing.
Package
1. Packed in woven plastic bag with inner polyethylene bag of 25kgs net each.
2. Stored in clean, cool and dry places, avoid contamination from foreign substance such as dust and moisture.
3. Nontoxic, noninflammable, inexplosive, no corrosion, the product is transported according to non-dangerous product.
Please click the button below to contact us for more!
